dmesg - Intel Core 2 Quad Q6600 13-10-12

Return To Intel Core 2 Quad Q6600 13-10-12 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-5-amd64 (Debian 2.6.32-46) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun Sep 23 10:07:46 UTC 2012
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
 BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000affa0000 (usable)
 BIOS-e820: 00000000affa0000 - 00000000affae000 (ACPI data)
 BIOS-e820: 00000000affae000 - 00000000affe0000 (ACPI NVS)
 BIOS-e820: 00000000affe0000 - 00000000affee000 (reserved)
 BIOS-e820: 00000000afff0000 - 00000000b0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0xaffa0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-DFFFF uncachable
  E0000-EFFFF write-through
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FC0000000 write-back
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000affa0000
 0000000000 - 00afe00000 page 2M
 00afe00000 - 00affa0000 page 4k
kernel direct mapping tables up to affa0000 @ 10000-15000
RAMDISK: 3770f000 - 37fefb8f
ACPI: RSDP 00000000000fa4e0 00014 (v00 ACPIAM)
ACPI: RSDT 00000000affa0000 0004C (v01 ACRSYS ACRPRDCT 20080523 MSFT 00000097)
ACPI: FACP 00000000affa0200 00084 (v01 052308 FACP1637 20080523 MSFT 00000097)
ACPI: DSDT 00000000affa0620 06464 (v01  A7399 A7399214 00000214 INTL 20051117)
ACPI: FACS 00000000affae000 00040
ACPI: APIC 00000000affa0390 00080 (v01 052308 APIC1637 20080523 MSFT 00000097)
ACPI: MCFG 00000000affa0410 0003C (v01 052308 OEMMCFG  20080523 MSFT 00000097)
ACPI: SLIC 00000000affa0450 00176 (v01 ACRSYS ACRPRDCT 20080523 MSFT 00000097)
ACPI: WDRT 00000000affa05d0 00047 (v01 052308 NV-WDRT  20080523 MSFT 00000097)
ACPI: OEMB 00000000affae040 00071 (v01 052308 OEMB1637 20080523 MSFT 00000097)
ACPI: HPET 00000000affa6a90 00038 (v01 052308 OEMHPET0 20080523 MSFT 00000097)
ACPI: NVHD 00000000affae0c0 00554 (v01 052308  NVHDCP  20080523 MSFT 00000097)
ACPI: AWMI 00000000affae620 0004E (v01 052308 OEMB1637 20080523 MSFT 00000097)
ACPI: SSDT 00000000affaf8b0 00A7C (v01 DpgPmm    CpuPm 00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-00000000affa0000
Bootmem setup node 0 0000000000000000-00000000affa0000
  NODE_DATA [0000000000013000 - 000000000001afff]
  bootmap [000000000001b000 -  0000000000030ff7] pages 16
(7 early reservations) ==> bootmem [0000000000 - 00affa0000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 00016d9584]    TEXT DATA BSS ==> [0001000000 - 00016d9584]
  #3 [003770f000 - 0037fefb8f]          RAMDISK ==> [003770f000 - 0037fefb8f]
  #4 [000009c000 - 0000100000]    BIOS reserved ==> [000009c000 - 0000100000]
  #5 [00016da000 - 00016da1b4]              BRK ==> [00016da000 - 00016da1b4]
  #6 [0000010000 - 0000013000]          PGTABLE ==> [0000010000 - 0000013000]
found SMP MP-table at [ffff8800000ff780] ff780
 [ffffea0000000000-ffffea00027fffff] PMD -> [ffff880001c00000-ffff8800043fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009c
    0: 0x00000100 -> 0x000affa0
On node 0 totalpages: 720684
  DMA zone: 56 pages used for memmap
  DMA zone: 106 pages reserved
  DMA zone: 3818 pages, LIFO batch:0
  DMA32 zone: 9799 pages used for memmap
  DMA32 zone: 706905 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at b0000000 (gap: b0000000:4ec00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880001800000 s90328 r8192 d24360 u524288
pcpu-alloc: s90328 r8192 d24360 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 710723
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2824864k/2883200k available (3083k kernel code, 464k absent, 57872k reserved, 2048k data, 592k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:440
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration failed
TSC: PIT calibration matches HPET. 1 loops
Detected 2399.956 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.91 BogoMIPS (lpj=9599824)
Security Framework initialized
SELinux:  Disabled at boot.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 0/0x0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
ACPI: Core revision 20090903
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 1/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 2/0x2 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU2: Thermal monitoring enabled (TM2)
CPU2: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 3/0x3 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU3: Thermal monitoring enabled (TM2)
CPU3: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (19199.59 BogoMIPS).
CPU0 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: group ffff88000180fbf0 cpus 0 group ffff88000188fbf0 cpus 1
  domain 1: span 0-3 level CPU
   groups: group ffff88000180fd00 cpus 0-1 (cpu_power = 2048) group ffff88000190fd00 cpus 2-3 (cpu_power = 2048)
CPU1 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: group ffff88000188fbf0 cpus 1 group ffff88000180fbf0 cpus 0
  domain 1: span 0-3 level CPU
   groups: group ffff88000180fd00 cpus 0-1 (cpu_power = 2048) group ffff88000190fd00 cpus 2-3 (cpu_power = 2048)
CPU2 attaching sched-domain:
 domain 0: span 2-3 level MC
  groups: group ffff88000190fbf0 cpus 2 group ffff88000198fbf0 cpus 3
  domain 1: span 0-3 level CPU
   groups: group ffff88000190fd00 cpus 2-3 (cpu_power = 2048) group ffff88000180fd00 cpus 0-1 (cpu_power = 2048)
CPU3 attaching sched-domain:
 domain 0: span 2-3 level MC
  groups: group ffff88000198fbf0 cpus 3 group ffff88000190fbf0 cpus 2
  domain 1: span 0-3 level CPU
   groups: group ffff88000190fd00 cpus 2-3 (cpu_power = 2048) group ffff88000180fd00 cpus 0-1 (cpu_power = 2048)
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI Warning: Incorrect checksum in table [OEMB] - EF, should be EC (20090903/tbutils-314)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:03.0: reg 10 io port: [0x4f00-0x4fff]
pci 0000:00:03.1: reg 10 io port: [0x4900-0x493f]
pci 0000:00:03.1: reg 20 io port: [0x4d00-0x4d3f]
pci 0000:00:03.1: reg 24 io port: [0x4e00-0x4e3f]
pci 0000:00:03.1: PME# supported from D3hot D3cold
pci 0000:00:03.1: PME# disabled
pci 0000:00:03.3: reg 10 32bit mmio: [0xfea80000-0xfeafffff]
pci 0000:00:04.0: reg 10 32bit mmio: [0xfea7f000-0xfea7ffff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:04.1: reg 10 32bit mmio: [0xfea7ec00-0xfea7ecff]
pci 0000:00:04.1: supports D1 D2
pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.1: PME# disabled
pci 0000:00:08.0: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:09.0: reg 10 32bit mmio: [0xfea78000-0xfea7bfff]
pci 0000:00:09.0: PME# supported from D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:0e.0: reg 10 io port: [0xd480-0xd487]
pci 0000:00:0e.0: reg 14 io port: [0xd400-0xd403]
pci 0000:00:0e.0: reg 18 io port: [0xd080-0xd087]
pci 0000:00:0e.0: reg 1c io port: [0xd000-0xd003]
pci 0000:00:0e.0: reg 20 io port: [0xcc00-0xcc0f]
pci 0000:00:0e.0: reg 24 32bit mmio: [0xfea7c000-0xfea7dfff]
pci 0000:00:0f.0: reg 10 32bit mmio: [0xfea73000-0xfea73fff]
pci 0000:00:0f.0: reg 14 io port: [0xc880-0xc887]
pci 0000:00:0f.0: reg 18 32bit mmio: [0xfea7e800-0xfea7e8ff]
pci 0000:00:0f.0: reg 1c 32bit mmio: [0xfea7e400-0xfea7e40f]
pci 0000:00:0f.0: supports D1 D2
pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0f.0: PME# disabled
pci 0000:00:10.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
pci 0000:00:10.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:00:10.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff]
pci 0000:00:10.0: reg 30 32bit mmio pref: [0xfea40000-0xfea5ffff]
pci 0000:01:07.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff]
pci 0000:01:07.0: reg 14 io port: [0xec00-0xec7f]
pci 0000:01:07.0: supports D1 D2
pci 0000:01:07.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:07.0: PME# disabled
pci 0000:00:0a.0: transparent bridge
pci 0000:00:0a.0: bridge io port: [0xe000-0xefff]
pci 0000:00:0a.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *7
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *7
ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:06: ioport range 0x800-0x80f has been reserved
system 00:06: ioport range 0x4000-0x407f has been reserved
system 00:06: ioport range 0x4080-0x40ff has been reserved
system 00:06: ioport range 0x4400-0x447f has been reserved
system 00:06: ioport range 0x4480-0x44ff has been reserved
system 00:06: ioport range 0x4800-0x487f has been reserved
system 00:06: ioport range 0x4880-0x48ff has been reserved
system 00:06: ioport range 0x4900-0x493f has been reserved
system 00:06: ioport range 0x4c00-0x4c7f has been reserved
system 00:06: ioport range 0x4c80-0x4cff has been reserved
system 00:06: iomem range 0xfec80000-0xfed3ffff has been reserved
system 00:06: iomem range 0xfed45000-0x1fd93ffff could not be reserved
system 00:06: iomem range 0xfefe0000-0xfefe01ff has been reserved
system 00:06: iomem range 0xfefe1000-0xfefe1fff has been reserved
system 00:06: iomem range 0xfee01000-0xfeefffff has been reserved
system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0c: ioport range 0xa00-0xa0f has been reserved
system 00:0c: ioport range 0xa10-0xa1f has been reserved
system 00:0c: ioport range 0xa20-0xa2f has been reserved
system 00:0c: ioport range 0xa30-0xa3f has been reserved
system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0e: iomem range 0x0-0x9ffff could not be reserved
system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
system 00:0e: iomem range 0x100000-0xbfffffff could not be reserved
system 00:0e: iomem range 0xfec00000-0xffffffff could not be reserved
pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01
pci 0000:00:0a.0:   IO window: 0xe000-0xefff
pci 0000:00:0a.0:   MEM window: 0xfeb00000-0xfebfffff
pci 0000:00:0a.0:   PREFETCH window: disabled
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
pci 0000:00:0b.0:   IO window: disabled
pci 0000:00:0b.0:   MEM window: disabled
pci 0000:00:0b.0:   PREFETCH window: disabled
pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
pci 0000:00:0c.0:   IO window: disabled
pci 0000:00:0c.0:   MEM window: disabled
pci 0000:00:0c.0:   PREFETCH window: disabled
pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04
pci 0000:00:0d.0:   IO window: disabled
pci 0000:00:0d.0:   MEM window: disabled
pci 0000:00:0d.0:   PREFETCH window: disabled
pci 0000:00:0a.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci 0000:00:0d.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io:  [0xe000-0xefff]
pci_bus 0000:01: resource 1 mem: [0xfeb00000-0xfebfffff]
pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
  alloc irq_desc for 23 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:04.0: PCI INT A disabled
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
  alloc irq_desc for 22 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:04.1: PCI INT B disabled
pci 0000:00:10.0: Boot video device
Unpacking initramfs...
Freeing initrd memory: 9090k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1350143537.696:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 5535
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
  alloc irq_desc for 24 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:0b.0: irq 24 for MSI/MSI-X
pcieport 0000:00:0b.0: setting latency timer to 64
  alloc irq_desc for 25 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:0c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:0c.0: setting latency timer to 64
  alloc irq_desc for 26 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:0d.0: irq 26 for MSI/MSI-X
pcieport 0000:00:0d.0: setting latency timer to 64
Linux agpgart interface v0.103
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:08: RTC can wake from S4
rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
No iBFT detected.
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:08: setting system clock to 2012-10-13 15:52:18 UTC (1350143538)
Initalizing network drop monitor service
Freeing unused kernel memory: 592k freed
Write protecting the kernel read-only data: 4240k
udev[76]: starting version 164
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
SCSI subsystem initialized
libata version 3.00 loaded.
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
  alloc irq_desc for 21 on node -1
  alloc kstat_irqs on node -1
forcedeth 0000:00:0f.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21
forcedeth 0000:00:0f.0: setting latency timer to 64
ACPI Warning for \_TZ_.THRM._TZD: Return Package type mismatch at index 0 - found Processor, expected Reference (20090903/nspredef-1012)
ACPI: Expecting a [Reference] package element, found type C
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (38 C)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19
  alloc irq_desc for 19 on node -1
  alloc kstat_irqs on node -1
firewire_ohci 0000:01:07.0: PCI INT A -> Link[LNKD] -> GSI 19 (level, low) -> IRQ 19
firewire_ohci: Added fw-ohci device 0000:01:07.0, OHCI version 1.0
forcedeth 0000:00:0f.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1d:92:9c:32:c1
forcedeth 0000:00:0f.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
pata_amd 0000:00:08.0: version 0.4.1
pata_amd 0000:00:08.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:04.1: setting latency timer to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:04.1: debug port 1
ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
ehci_hcd 0000:00:04.1: irq 22, io mem 0xfea7ec00
ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:04.1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ahci 0000:00:0e.0: version 3.0
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
  alloc irq_desc for 20 on node -1
  alloc kstat_irqs on node -1
ahci 0000:00:0e.0: PCI INT A -> Link[LSA0] -> GSI 20 (level, low) -> IRQ 20
  alloc irq_desc for 27 on node -1
  alloc kstat_irqs on node -1
ahci 0000:00:0e.0: irq 27 for MSI/MSI-X
ahci 0000:00:0e.0: controller can do NCQ, turning on CAP_NCQ
ahci 0000:00:0e.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode
ahci 0000:00:0e.0: flags: 64bit ncq sntf led clo pmp pio 
ahci 0000:00:0e.0: setting latency timer to 64
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m8192@0xfea7c000 port 0xfea7c100 irq 27
ata4: SATA max UDMA/133 abar m8192@0xfea7c000 port 0xfea7c180 irq 27
ata5: SATA max UDMA/133 abar m8192@0xfea7c000 port 0xfea7c200 irq 27
ata6: SATA max UDMA/133 abar m8192@0xfea7c000 port 0xfea7c280 irq 27
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
ohci_hcd 0000:00:04.0: setting latency timer to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:04.0: irq 23, io mem 0xfea7f000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
usb usb2: SerialNumber: 0000:00:04.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
firewire_core: created device fw0: GUID 0010dc000163d449, S400
ata2: port disabled. ignoring.
usb 1-2: new high speed USB device using ehci_hcd and address 2
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-8: WDC WD3200AAJS-22B4A0, 01.03A01, max UDMA/133
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      WDC WD3200AAJS-2 01.0 PQ: 0 ANSI: 5
ata5.00: ATAPI: HL-DT-ST DVDRAM GH15F, EG00, max UDMA/100
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH15F     EG00 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
sd 2:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sd 2:0:0:0: Attached scsi generic sg0 type 0
sr 4:0:0:0: Attached scsi generic sg1 type 5
usb 1-2: New USB device found, idVendor=0bda, idProduct=0151
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: USB2.0-CRW
usb 1-2: Manufacturer: Generic
usb 1-2: SerialNumber: 20060413092100000
usb 1-2: configuration #1 chosen from 1 choice
usb 1-10: new high speed USB device using ehci_hcd and address 4
usb 1-10: New USB device found, idVendor=0951, idProduct=1607
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: DataTraveler 2.0
usb 1-10: Manufacturer: Kingston
usb 1-10: SerialNumber: 001478544884F931C7840279
usb 1-10: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi7 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 2-6: new full speed USB device using ohci_hcd and address 2
PM: Starting manual resume from disk
PM: Resume from partition 8:5
PM: Checking hibernation image.
PM: Error -22 checking image file
PM: Resume from disk failed.
EXT4-fs (sda6): mounted filesystem with ordered data mode
usb 2-6: New USB device found, idVendor=04b8, idProduct=011d
usb 2-6: New USB device strings: Mfr=64, Product=77, SerialNumber=0
usb 2-6: Product: EPSON Scanner
usb 2-6: Manufacturer: EPSON
usb 2-6: configuration #1 chosen from 1 choice
udev[426]: starting version 164
ACPI: SSDT 00000000affae670 00277 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
processor LNXCPU:00: registered as cooling_device0
ACPI: SSDT 00000000affaeb00 00277 (v01 DpgPmm  P002Ist 00000012 INTL 20051117)
processor LNXCPU:01: registered as cooling_device1
ACPI: SSDT 00000000affaef90 00277 (v01 DpgPmm  P003Ist 00000012 INTL 20051117)
processor LNXCPU:02: registered as cooling_device2
ACPI: SSDT 00000000affaf420 00277 (v01 DpgPmm  P004Ist 00000012 INTL 20051117)
processor LNXCPU:03: registered as cooling_device3
input: PC Speaker as /devices/platform/pcspkr/input/input2
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
ACPI: WMI: Mapper loaded
i2c i2c-0: nForce2 SMBus adapter at 0x4d00
i2c i2c-1: nForce2 SMBus adapter at 0x4e00
ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 23
nvidia 0000:00:10.0: PCI INT A -> Link[SGRU] -> GSI 23 (level, low) -> IRQ 23
nvidia 0000:00:10.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:00:10.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  195.36.31  Thu Jun  3 08:19:50 PDT 2010
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
HDA Intel 0000:00:09.0: power state changed by ACPI to D0
HDA Intel 0000:00:09.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
HDA Intel 0000:00:09.0: PCI INT A -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:00:09.0: setting latency timer to 64
hda_codec: ALC1200: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:09.0/input/input6
usb-storage: device scan complete
usb-storage: device scan complete
scsi 7:0:0:0: Direct-Access     Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
sd 7:0:0:0: Attached scsi generic sg2 type 0
sd 7:0:0:0: [sdb] 15646656 512-byte logical blocks: (8.01 GB/7.45 GiB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 16 07 09 51
sd 7:0:0:0: [sdb] Assuming drive cache: write through
sd 7:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1 sdb2
scsi 6:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
sd 7:0:0:0: [sdb] Assuming drive cache: write through
sd 7:0:0:0: [sdb] Attached SCSI removable disk
scsi 6:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
scsi 6:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
scsi 6:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:1: Attached scsi generic sg4 type 0
sd 6:0:0:2: Attached scsi generic sg5 type 0
sd 6:0:0:3: Attached scsi generic sg6 type 0
sd 6:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:1: [sdd] Attached SCSI removable disk
sd 6:0:0:2: [sde] Attached SCSI removable disk
sd 6:0:0:3: [sdf] Attached SCSI removable disk
Adding 514040k swap on /dev/sda5.  Priority:-1 extents:1 across:514040k 
loop: module loaded
EXT4-fs (sda7): mounted filesystem with ordered data mode
fuse init (API version 7.13)
  alloc irq_desc for 28 on node -1
  alloc kstat_irqs on node -1
forcedeth 0000:00:0f.0: irq 28 for MSI/MSI-X
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
eth0: no IPv6 routers present
usb 1-10: USB disconnect, address 4
usb 1-2: reset high speed USB device using ehci_hcd and address 2
usb 1-2: reset high speed USB device using ehci_hcd and address 2
usb 1-2: reset high speed USB device using ehci_hcd and address 2
usb 1-2: reset high speed USB device using ehci_hcd and address 2
usb 1-2: reset high speed USB device using ehci_hcd and address 2
usb 1-2: reset high speed USB device using ehci_hcd and address 2
usb 1-2: reset high speed USB device using ehci_hcd and address 2
usb 1-2: reset high speed USB device using ehci_hcd and address 2
usb 1-2: reset high speed USB device using ehci_hcd and address 2
usb 1-2: reset high speed USB device using ehci_hcd and address 2
usb 1-2: reset high speed USB device using ehci_hcd and address 2
usb 1-2: reset high speed USB device using ehci_hcd and address 2
usb 1-2: reset high speed USB device using ehci_hcd and address 2
usb 1-2: reset high speed USB device using ehci_hcd and address 2
usb 1-2: reset high speed USB device using ehci_hcd and address 2
usb 1-2: reset high speed USB device using ehci_hcd and address 2
usb 1-2: reset high speed USB device using ehci_hcd and address 2
usb 1-2: reset high speed USB device using ehci_hcd and address 2
usb 1-2: reset high speed USB device using ehci_hcd and address 2
usb 1-2: reset high speed USB device using ehci_hcd and address 2

Return To Intel Core 2 Quad Q6600 13-10-12 System Information